1. Assembly scheme
If your design consists of several moss plates in a package, there will be an assembly scheme attached. This will tell you in what order and arrangement to mount the plates.

Prior to the assembly, make sure that the number of moss panels in the package is the same as on the assembly scheme. The numbers referenced therein can be found on the back of each moss panel.

2. Surface preparation
Position the product on the wall. Mark the location of the panels using our template guide provided in your order.

3. Wall preparation for dowels
Attach the template to the wall and drill holes in the marked areas. Insert the appropriate wall dowels (depending on the wall type). Screw in the screw, but leave it sticking out of the wall sufficiently for hanging.

4. Install moss on the wall
Hang the moss panel on the wall and plug in the electrical cord to check if the lights are working.

5. Connecting to existing electrical outlet (for non-"plug & play" products only)
Warning: The installation should only be undertaken by qualified personnel. These steps are to be followed once the electrical connection is already prepared.

Take the power cord cable out of the junction box on the back of the plate. Connect the power cable from the existing electrical outlet to the electrical junction box. Hang the moss on the wall and check if the lights are working properly.